Slide-out Drawer (1-pack)

The regular sized shelves have a 10 kg (22 lbs) weight limit. 
The extra wide shelves have a 10 kg (22 lbs) weight limit.The entire BoxThrone system has a weight limit of 180 kg (400 lbs).

Great question, your Majesty! It depends on how you set it up — each shelf gives you a max area of 39 x 43.5 cm storage space, minus the size of the 4 pillars (4 x 2.5 cm each). That's about the size of one standard square box and a couple of "expansion" sized box, or 4-5 smaller games. Two rectangle boxes also fit in that space. Configuring your BoxThrone to maximize space will allow you to fit up to 20 games of various sizes per BoxThrone.

Great question, your Majesty! It depends on how you set it up — each shelf gives you a max area of 39 x 43.5 cm storage space, minus the size of the 4 pillars (4 x 2.5 cm each). That's about the size of one standard square box and a couple of "expansion" sized box, or 4-5 smaller games. Two rectangle boxes also fit in that space. Configuring your BoxThrone to maximize space will allow you to fit up to 20 games of various sizes per BoxThrone.

Super modular! Every "base" and "top"  is identical, and the "columns" are all interchangeable. This means that you can re-configure ANY BoxThrone setup into a different layout (e.g., the BoxKing can be converted from two double BoxThrone towers into three single BoxThrones). You can even create triple BoxThrones (approximately 9 feet high). If you can imagine it, you can do it!

The BoxThrone is almost completely powder-coated metal. The exception is the bases - these are made from high-grade, furniture-quality ABS. These bases have brass screw linings to make to the BoxThrone easy to construct. The ABS bases are engineered and tested to hold a ton of weight - over 200 kg (over 400 lbs).

Front: 35.5 cm / 13.97"
Side: 33.6 cm  / 13.22"

BoxDuke + 24 shelves: 122 cm / 48" wide x 79 cm / 31" tall x 39 cm / 15.35" deep
BoxKing + 48 shelves: 122 cm / 48" wide x 157 cm / 62" tall x 39 cm / 15.35" deep
BoxLegend + 80 shelves: 201 cm / 79" wide x 157 cm / 62" tall x 39 cm / 15.35" deep
One tower (tower expansion): 43.5 cm / 17.13" wide x 157 cm / 62" tall x 39 cm / 15.35" deep

Adding extra wide shelves to your BoxThrone system? Simply add 29.5 cm / 11.5" to the width.

ShortThrones were designed to connect to other ShortThrones, but after talking to customers and backers, we want to give you more flexibility in your BoxThrone setups.

So, we have created a "ShortThrone shelf adjuster" - a free 3D printer file. Print this file off with a 3D printer, and insert it into the ShortThrone's column holes to raise the shelves up a little and make them even with the side connecting to your regular BoxThrone.

Basic instruction manual

This manual comes with all BoxThrone systems. It covers basic frame construction (single and double BoxThrones), shelf insertion and safety notices. Click here to see it!

Strapping the playmat holder

Imagine the top 4 holes of the playmat holder are labelled 1, 2, 3, and 4 from top to bottom. Take a strap and push it through the outer face of Hole 1, and then through the inner face of Hole 2. Pull this strap down to the outer face of Hole 3, push it through Hole 3 and then loop it through Hole 4. Pull the strap until both dangling straps are even. This way you'll get a nice C-shaped (Pacman-esque) gripping mechanism with the straps.

Inserting the drawer

The drawer is made up of 3 parts: the two outer rails and the drawer tray. Insert the outer rails into the BoxThrone column holes first. Ensure they are lined up evenly and that the black rubber "bumper" in the rail is facing towards the back of the BoxThrone. Slide the drawer tray onto the rails.

To remove the drawer tray from the outer rails, there are two latch mechanisms inside each outer rail. They are about halfway in, and look like black plastic sticks. Using a pen or long screwdriver, push one down, and the other up to release the drawer.