The freedom of Slide-iness
Dry-erase Play Count Trackers
Revert Anytime
Give your KALLAX a royal upgrade.
-
TURN CUDE SHELVES INTO BOARD GAME SHELVES
Every game gets its own shelf! Slide games in and out with ease. No more wiggling games off the bottom of the stack.
-
GAMES STORED FLAT=NO MESS
No more jumbled pieces from storing your games sideways. Drifting lids are a thing of the past when every game is stored flat.
-
ADJUST THE SHELF HEIGHT WITH EASE
Easily adjust for games of different heights with two “instant height bumps.” Swap out taller or shorter boxes effortlessly.
LAX RAX with Matching Accessories
LAX RAX BENEFITS
-
Transforms Cube Shelves
-
Flat Storage, No Mess
-
Durable Birch Rods
-
Instant Height Adjustments
Regular version
Discover it!
Heavy-duty version
Discover it!Quick instructional video:
Discover it!FAQ
You can reach us anytime at support@boxkinggaming.com
We try to answer all emails within 48 hours.
I have a 4x4 cube shelf, which set should I get?
The RAX EMPIRE pledge lets you fully deck out the 4x4 Kallax with 3 shelves per cube.
RAX LORD lets you deck out a 2x4 Kallax with 3 shelves per cube.
RAX DABBLER lets you deck out a 1x4 (horizontally) or 2x2 Kallax with 3 shelves per cube.
Do I need heavy duty or regular LAX RAX?
A regular LAX RAX shelf uses (at a minimum), 4 rods. A heavy-duty LAX RAX shelf uses 8 rods.
You can achieve the same weight rating as a heavy duty shelf using an 8-rod regular LAX RAX setup.
Will this fit in non-Kallax cube shelves?
Although LAX RAX is designed for Kallax, it will work with any cubes that are up to 33.6cm wide (13.25"). If the width of your cubes is larger than that, then LAX RAX won't work with your shelves.
If the width is slightly smaller (i.e. Home & Garden Cube shelves that are about 33.4cm wide), you can place one side of the grips slightly further back in the cube shelves so that the LAX RAX rods fit (making a slight diagonal placement, but this won't be very noticeable).
How do the organizer drawers work?
The drawers are 31x35x5cm - This means they have an approximate depth of 4.8cm, which covers most pocket game sizes. The drawer is also open top which means technically they can accommodate any height of game/bits/goodies/things. The each have a silver or black nylon material pull loop.
On the dividers - the dividers are those white boney looking things you see in the GIFs in the campaign page, they are approximately 35-40cm long and you get 6 of them - this would be enough to create (at a maximum) a 4x4 grid of storage holes. However, we know games come many sizes so you can snap portions of the dividers off to create smaller storage sections. Each of the 6 divider strips have "teeth" on one side, so you can slot them into each other. Please see the GIFs on the campaign page for an example of said slotting. Each of these "teeth" are 8mm wide, followed by a 2mm gap, followed by an 8mm tooth and so on.